he OvisLink VoIP-800 rack mountable Voice over IP gateway is designed for performance and expansion.  The two chassis slots can accommodate either 4-port PXO or 4-PXS modules.  This allows a total of eight channels of simultaneous voice and fax transmission.   

High Quality Internet Telephony
With OvisLink eLive series of VoIP gateways, the dream of making unlimited long distance phone call and fax using conventional phone is realized.  Once setup, the VoIP gateway will automatically take call request from conventional telephone handset or through company's PBX network, then make connections through Internet with the remote gateway to make traditional phone calls.  All this process is transparent to users.  They will enjoy the freedom to communicate freely without worrying about the telephone charge.  

New Dimension of Communication freedom
The latest Voice over IP technology completely open a new dimension of freedom in real time communication.  For corporate environment, VoIP allows branch offices to keep in touch as effectively as in the local office.  Using the gateway technology, company can even provide remote support to oversea customers without incurring extra cost.  For family or friends living far away from each other, VoIP make the world much closer.  Best of all, all these technology does not require you to operate the phone call any differently.  All your need is the VoIP gateways and your ordinary telephone set.

Quality and Standard Compliance
Equipped with high performance RISC and DSP processors running on real-time OS.  The VoIP-800 ensure high quality voice transmission.  Furthermore, its support SIP(proxy mode) and H.323(point to point/multipoint mode only) protocol ensure compatibility with most VoIP equipments including Cisco's ATA186 and IP phones.  QoS Support for VoIP packets maintain the quality of transmission for VoIP packets.

Built for Enterprise
With our point to point setup guide, you can easily setup your multi-point VoIP connection with other H.323 gateways.  This is the ideal solution to establish high quality VoIP connection between offices.  The gateway can be setup to connect with PBX (digital PBX require analogue extension) and then your VoIP call will operate identically as your regular phone call in your PBX system.  Why spend more on toll call, use OvisLink H.323 Enterprise gateway today. 

FXS*:  The FXS ports connect to your ordinary telephone or FAX.  Through your telephone or FAX, your can dial out through the gateway to other VoIP gateway or IP Phone.

WAN port: VoIP gateway has a WAN port that connects to the Internet directly or to a broadband router.  User also setup the web or telnet configuration through the WAN port.

Call Forward/Transfer:  This function require FXO port.  It allow remote PSTN users to dial into the FXO port and use the gateway's dial-plan to make VoIP calls.

*The FXO or FXS port works with analogue telephone standard only.  If you have ISDN phone line or digital PBX, separate digital to analogue converter is required.

• Effective QoS scheme allowing simultaneous VoIP and Data communication
• Up to 8 channel of real-time voice and fax  simultaneously
• Built-in TFTP and Flash memory for firmware upgrade via network
• Call forward and Call Transfer
• Support multiple VoIP Gateway on a LAN port
• Dynamic IP/ PPPoE client support
• DHCP client support
• Bulk Call sucessful rate over 99.98%
• Dynamic DNS support

Call Control Protocol

• H.323 version 3
• SIP

Voice Coder Support

• G.711, G.723.1, and G.729 A/B

Real-time FAX Relay:

• T.38

Digital Signal Processors 

• One TI TMS320VC549 DSP per module 
• 100 MIPS per DSP processor 
• On-chip memory: 32K word of SRAM, 16K word of ROM
• Local SRAM 128K x 16 for each DSP 

Control Processor 

• 32-bit ARM7 TDMI core 
• 8K byte unified cache 
• 4Kworde Write buffer 
• Embedded on-chip Ethernet MAC with associated BDMA 
• Local 2M x 32 SDRAM and 2M x 16 Flash 

I/O Standard 

• 10/100 BaseTX RJ 45 interface 
• RJ 11 Loop Start interfaces for FXS/FXO 
• RJ 45 for E&M Type V 4w interface Mechanical 

Modules

• 4-port FXO
• 4-port FXS

• Compression algorithms: ITU G. 711, G.723.1, and G.729A/B. 
• Hybrid echo cancellation G.168 (16 ms) 
• Auto switch between Fax and voice 
• DTMF tone detection/regeneration 
• Channel: four channels per module 
• Comfort Noise Generation (CNG) 
• User programmable Call Progress detection/generation
• Voice Activity Detection (VAD) 
• User programmable Gain Control 

Fax Facsimile protocol: 

• T.30 Group 3 
• Modulation formats: V.21, V.27ter, V.29, V.17 
• Real-time fax over IP 
• DTMF tone detection/regeneration 

Management Tools 

• RS 232 console port interface 
• Web Management 
• Telnet Server 
• TFTP and flash memory for remote software download and upgrade 

H.323 Protocol Stack 

• RAS sub-stack for Terminals and Gatekeepers: supports all mandatory and optional messages (Tx and Rx) as specified in table 19/H.255.0 
• H.245 sub-stack: supports the Signaling Entities of Master Slave Determination, Capability Exchange, Open Logical Channels, and Close Logical Channels 
• Q.931: supports all mandatory messages as specified in table 4/H.255.0 
• Compliant with H.323 Version 1 and Version 2

Environment & Power 

• 19Ħħ rack mountable or desk top 
• Dimension: 445 x 275 x 44 mm, 4.22kg
• Operating temperature: 32 to 122 F (0℃ to 50℃)
• Operating humidity: 10% to 95% (non-condensing)
• Storage temperature: 14 to 140 F (-10 to 60℃) AC-to-DC
• power supply (90-260 VAC, auto-ranging, 50-60 Hz.) 

EMI

• CE 
• FCC part 15 A 
• FXS/FXO (Compliant with ITU-T G.712) 
• UL