 |  | 
  
|
|
|
Feature |
he
OvisLink VoIP-400 series Voice over IP gateway is designed for
performance and expansion. The series comes equipped with either 4FXO,
4FXS, or 2FXO+2FXS configurations. They allow 4 channels of
simultaneous voice and fax transmission.
High Quality Internet Telephony
With OvisLink eLive
series of VoIP gateways, the dream of making unlimited long distance
phone call and fax using conventional phone is realized. Once setup,
the VoIP gateway will automatically take call request from conventional
telephone handset or through company's PBX network, then make
connections through Internet with the remote gateway to make traditional
phone calls. All this process is transparent to users. They will enjoy
the freedom to communicate freely without worrying about the telephone
charge.
New Dimension of
Communication freedom
The latest Voice over IP technology completely open a new dimension of
freedom in real time communication. For corporate environment, VoIP
allows branch offices to keep in touch as effectively as in the local
office. Using the gateway technology, company can even provide remote
support to oversea customers without incurring extra cost. For family
or friends living far away from each other, VoIP make the world much
closer. Best of all, all these technology does not require you to
operate the phone call any differently. All your need is the VoIP
gateways and your ordinary telephone set.
Quality and
Standard Compliance
Equipped with high performance RISC and DSP processors running on
real-time OS. The VoIP-400 ensure high quality voice transmission.
Furthermore, its support of SIP (firmware upgrade) and H.323 protocol
ensure compatibility with most VoIP equipments including Cisco's ATA186
and IP phones. QoS Support for VoIP packets maintain the quality of
transmission for VoIP packets.
Built for
Enterprise
With our point to point setup guide, you can easily setup your
multi-point VoIP connection with other H.323 gateways. This is the
ideal solution to establish high quality VoIP connection between
offices. The gateway can be setup to connect with PBX (digital PBX
require analogue extension) and then your VoIP call will operate
identically as your regular phone call in your PBX system. Why spend
more on toll call, use OvisLink H.323 Enterprise gateway today.
|
|
Application |
| FXO:
The FXO ports connect to the PSTN line (analogue telephone line from the
telephone operator) or company's PBX line. It allows the VoIP device to
communicate with the ordinary telephone system. Having the PXO port is
necessary if you want your device to serve as a gateway for remote
caller to reach your local telephone line.
FXS: The FXS ports connect to
your ordinary telephone or FAX. Through your telephone or FAX, your can
dial out through the gateway to other VoIP gateway or IP Phone.
WAN port: VoIP gateway has a WAN
port that connects to the Internet directly or to a broadband router.
User also setup the web or telnet configuration through the WAN port.
Call Forward/Transfer: This
function require FXO port. It allow remote PSTN users to dial into the
FXO port and use the gateway's dial-plan to make VoIP calls.
*The FXO or FXS port
works with analogue telephone standard only. If you have ISDN phone
line or digital PBX, separate digital to analogue converter is required.
|
|
Specification |
Key Feature
- Effective QoS scheme allowing
simultaneous VoIP and Data communication
- Up to 4 channel of real-time voice
and fax simultaneously
- Built-in TFTP and Flash memory for
firmware upgrade via network
- Call forward and Call Transfer
- Support multiple VoIP Gateway on a
LAN port
- Dynamic IP/ PPPoE client support
- DHCP client support
- Dynamic DNS support
- Bulk Call successful rate over
99.98%
Call Control Protocol
- H.323 version 3 (point 2
point/multipoint)
- SIP (proxy mode)
Voice Coder Support
- G.711, G.723.1, and G.729 A/B
Real-time FAX Relay:
Digital Signal Processors
- One TI TMS320VC5409 DSP
- 100 MIPS per DSP processor
- On-chip memory: 32K word of SRAM,
16K word of ROM
- Local SRAM 128K x 16 for each DSP
Control Processor
- 32-bit ARM7 TDMI core
- 8K byte unified cache
- 4Kworde Write buffer
- Embedded on-chip Ethernet MAC with
associated BDMA
- Local 2M x 16 SDRAM and 1M x 16
Flash
I/O Standard
- 10/100 BaseTX RJ 45 interface
- RJ 11 Loop Start interfaces for FXS/FXO
Management Tools
- RS 232 console port interface
- Web Management
- Telnet Server
- TFTP and flash memory for remote
software download and upgrade
|
Speech
- Compression algorithms: ITU G. 711,
G.723.1, and G.729A/B.
- Hybrid echo cancellation G.168 (16
ms)
- Auto switch between Fax and voice
- DTMF tone detection/regeneration
- Channel: four channels per module
- Comfort Noise Generation (CNG)
- User programmable Call Progress
detection/generation
- Voice Activity Detection (VAD)
- User programmable Gain Control
Fax Facsimile protocol:
- T.30 Group 3
- Modulation formats: V.21, V.27ter,
V.29, V.17
- Real-time fax over IP
- DTMF tone detection/regeneration
H.323 Protocol Stack
- RAS sub-stack for Terminals and
Gatekeepers: supports all mandatory and optional messages (Tx and
Rx) as specified in table 19/H.255.0
- H.245 sub-stack: supports the
Signaling Entities of Master Slave Determination, Capability
Exchange, Open Logical Channels, and Close Logical Channels
- Q.931: supports all mandatory
messages as specified in table 4/H.255.0
- Compliant with H.323 Version 1 and
Version 2
Environment & Power
- Dimension: 240 x 134 x 45 mm, 1.9kg
- Operating temperature: 32 to 122 F
(0℃ to 50℃)
- Operating humidity: 10% to 95%
(non-condensing)
- Storage temperature: 14 to 140 F
(-10 to 60℃) AC-to-DC
- power supply (90-260 VAC,
auto-ranging, 50-60 Hz.)
EMI
- CE
- FCC part 15 A
- FXS/FXO (Compliant with ITU-T
G.712)
- UL
|
| |
|
Ordering Information |
eLive
VoIP-422 4-port VoIP, 2 FXO + 2FXS ports
eLive VoIP-440 4-port VoIP, 4 FXS ports
eLive VoIP-404 4-port VoIP, 4 FXO ports |
|
|